Protect Windows Server with FalconStor DiskSafe Agent

Protect Windows Server with FalconStor DiskSafe Agent

Please refer to the steps below on how to Protect Windows Server with DiskSafe Agent

  1. Download the FalconStor DiskSafe Agent 4-22.2216 (Around 105MB) and install it to Windows 2012R2 Server. it will prompt to reboot server once the DiskSafe Agent is installed
  1. Start the ISCSI Services
Get-Service | ? name -like "*iscsi*" | Start-Service
  1. Click DiskSafe and Right Click on Disks –> Protect

CDPVA-DiskSafe-01

  1. Select Disk 0 to protect the C Drive

CDPVA-DiskSafe-02

  1. Configure Server Name to point to FalconStor CDPVA, with username = fsadmin , Password = IPStor101 (Default). Check ISCSI and click OK

CDPVA-DiskSafe-03

  1. Check Enabled Thin Provisioning to save storage space

CDPVA-DiskSafe-04

  1. New SAN Resources will be created in CDPVA

CDPVA-DiskSafe-05

  1. Click Next to continue

CDPVA-DiskSafe-06

  1. Click Next to continue

CDPVA-DiskSafe-07

  1. Define the protection schedule, daily or hourly

CDPVA-DiskSafe-08

  1. Click Next to continue

CDPVA-DiskSafe-09

  1. Click Next to continue

CDPVA-DiskSafe-10

  1. Wait for the First Syncronization to complete

CDPVA-DiskSafe-11

You Server is protected by FalconStor DiskSafe now

Leave a Comment