I noticed that my new 240GB SSD Drive is getting full very fast even with only few VMs running on vSphere 6 Server and I had decided to spend sometime to understand further instead of purchasing a large capacity SSD Drive for my home lab. Please refer to the following on my finding VMFS file …
Please refer to the following steps on how to provision Nimble VSA in my lab enviroment Download the Nimble Virtual Array 5.0.1.0 (Around 1.7GB) – Hybrid Array OVA file from InfoSight – Partner Login is required Upload the OVF File to vCenter 6.7 with $ovf="f:\NimOS-5.0.1.0-511426-opt.ova" Import-VApp -Name NimOS5 -Datastore EVO -VMHost "192.168.1.188" -Source $ovf -DiskStorageFormat …
Please refer to the steps below to easily accessing the GUI of Brocade SAN Switch without using Broswer Console to the Brocade SAN Switch with default username = admin & Password = password to configure the IP Address Warning: Default password not changed for 'root'. Please login as 'root' to change it. Please change passwords …
Accessing GUI of Brocade SAN Switch without Broswer Read More »
We got a request from client to disable ESMTP in Exchange 2016 for PCI DSS Compliance This is the default Exchange 2016 response for EHLO Based on the documentation from Microsoft on Exchange 2016 Receiver #Variable $Receiver1="Default Frontend MYLAB-EX16" $Server1 = "MYLAB-EX16" $Banner = "220 mail.aventistech.info" #MUST start with 220 $FQDN = "mail.mail.aventistech.info" #Disable Default …
Disabled ESMTP in Exchange 2016 for PCI DSS Compliance Read More »
Please refer to the steps below to send Email via Port 587 with openssl Telnet cannot be used as once you issues STARTTLS, the session will be encrypted and you will not be able to enter any commands Port 587 – Securing SMTP communications using Transport Layer Security (TLS). STARTTLS Prepare your username & password …
I always encounter “The OVF descriptor is not available” when using the Web client to import OVF If i use the PowerCLI below to import OVF with the same OVF file, it will be always successfully #Login to vCenter / vSphere Host Connect-VIServer -Server 192.168.1.121 -User [email protected] -Password P@ssw0rd #Map Network Drive to T: $net …
PowerCLI-Import OVF | The OVF descriptor is not available Read More »
Please refer to the following steps on how to create Linked Clone with 1 Master Image (Windows 2012 R2 Server) without vCenter in my Lab on SSD Hard Disk Install Windows 2012 R2 Server with latest patches and do run SYSPREP and save it for our Master Image C:\Windows\System32\SysPrep\SysPrep.exe Check “Generalize” to generate a new …
I had subscribe 5 x Fixed Public IP Address for my home lab, and please refer to the following steps on how to assign all public IP to a single WAN Interface login to pfSense, and go to “Firewall” > “Virtual IPs” > +Add Select “IP Alias” , Interface = “WAN” and specify the IP Address …
Enable Authenticated client SMTP submission in Office 365 Send Email via Office 365 with Python 3.8 Send Email via Office 365 with PowerShell Verify Test Email is delivered
